任勇,陈桂荣,邱长军,邹树梁,李林升,周炬.基于Workbench的防辐射挖掘机驾驶舱支座的有限元分析[J].南华大学学报(自然科学版),2014,28(1):63~68.[REN Young,CHEN Gui-rong,QIU Chang-jun,ZOU Shu-liang,LI Lin-sheng,ZHOU Ju.Finite Element Analysis of the Anti-radiation Excavator Cockpit Supporting Pedestal Based on Workbench[J].Journal of University of South China(Science and Technology),2014,28(1):63~68.] |
基于Workbench的防辐射挖掘机驾驶舱支座的有限元分析 |
Finite Element Analysis of the Anti-radiation Excavator Cockpit Supporting Pedestal Based on Workbench |
投稿时间:2013-09-28 |
DOI: |
中文关键词: 辐射防护 驾驶舱支座 优化设计 模态分析 Ansys Workbench |
英文关键词:radiation protection the cockpit supporting pedestal optimal design modal analysis ANSYS Workbench |
基金项目:湖南省重大科技专项基金资助项目(2012FJ1007);湖南省重点学科建设基金资助项目(湘教发[2011]76号);湖南省高校科技创新团队支持计划资助项目(湘教通[2012]318号);湖南省自然科学基金资助项目(12JJ3049) |
|
摘要点击次数: 631 |
全文下载次数: 662 |
中文摘要: |
增加了屏蔽层的防辐射驾驶舱较之原来驾驶舱增重了5.5 t,有必要对其支座的强度进行分析与校核.本文应用ANSYS Workbench对防辐射挖掘机驾驶舱支座进行有限元分析,得到其应变和应力分布情况;采取支撑板和回转平台底板加厚等措施对驾驶舱支座进行结构优化.最后对挖掘机回转平台进行模态分析,得出回转平台前十阶的固有频率和振型.模态分析为支撑座的强度设计,减少驾驶舱的振动提供了理论依据. |
英文摘要: |
The radiation protection cockpit addied with the shielding layer gained 5.5 t more than the original weight,so it was necessary to analyse and check the strength of the supporting pedestal.The finite element analysis was proceeded for the radiation excavator cockpit supporting pedestal by using ANSYS Workbench,and the deformation and stress distribution of cockpit supporting pedestal were obtained.Then the structure of cockpit supporting pedestal was optimized by thickening the supporting plate and rotation platform baseplate.Finally,the modal analysis was conducted for the excavator rotation platform,and the inherent frequency and vibrational modes of the first ten orders of rotation platform were obtained.The modal analysis provided the effective way to design the strength of the supporting pedestal and reduce the vibration of the cockpit. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|