| 李一平，宫纪明.基于CAE技术的热塑性弹性体制品翘曲变形优化研究[J].南华大学学报(自然科学版),2013,27(2):37~41.[LI Yi-ping,GONG Ji-ming.Optimization of Plastic-parts Warpage with CAE Technology[J].Journal of University of South China(Science and Technology),2013,27(2):37~41.] |
| 基于CAE技术的热塑性弹性体制品翘曲变形优化研究 |
| Optimization of Plastic-parts Warpage with CAE Technology |
| 投稿时间：2013-05-05 |
| DOI： |
| 中文关键词: CAE技术 注塑件 翘曲变形 正交实验 |
| 英文关键词:CAE technology plastic-parts warpage orthogonal experiment |
| 基金项目:安徽省教育厅自然科学基金资助项目（KJ2012Z359） |
|
| 摘要点击次数: 824 |
| 全文下载次数: 1026 |
| 中文摘要: |
| 根据MOLDFLOW在设计过程中用到的参数，采用正交实验的方法，确定了最佳的工艺组合，同时找出对翘曲变形影响显著的因素，并对这些影响显著因素的取值进一步优化，从而实现注塑件翘曲变形的优化.实验证明，通过这种方法优化后的制品的翘曲变形是最小的，优化效果非常好。 |
| 英文摘要: |
| Now optimization of plastic-parts warpage with CAE technology is a topic of concern.This paper optimizes this problem,the optimum composition was determined by orthogonal experiment,and significant factors of warping effect were found,then the warpage is reduced by optimizing these parameters. Experiments prove that the effect on optimization of warpage is very good. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |