| 欧阳八生.基于偏微分法的无刃铰刀刃磨参数的分析[J].南华大学学报(自然科学版),2004,(2):49~51.[.The Analysis of Grinding Technological Parameters for Non-blade Reamer Base on Partial Differentiation[J].Journal of University of South China(Science and Technology),2004,(2):49~51.] |
| 基于偏微分法的无刃铰刀刃磨参数的分析 |
| The Analysis of Grinding Technological Parameters for Non-blade Reamer Base on Partial Differentiation |
| 修订日期：2004-03-04 |
| DOI： |
| 中文关键词: 无刃铰刀,刃磨,工艺参数 |
| 英文关键词:non-blade reamer,grinding,technological parameters |
| 基金项目: |
| 欧阳八生 |
| 南华大学机械工程学院 湖南衡阳421001 |
| 摘要点击次数: 761 |
| 全文下载次数: 4 |
| 中文摘要: |
| 通过对无刃铰刀刃磨工艺参数进行分析,给出了刃磨径向进给尺寸———磨去弓形高h及工作台主轴倾斜角φ倾的计算公式.椐此可控制铰刀圆柱刃带F尺寸及公差,保证切削锥角φ,达到刃磨质量要求. |
| 英文摘要: |
| By means of the analysis of grinding technological parameters for non-blade reamer,this paper provides calculation formula for grinding radial feed and angle of main shaft inclination.It can be used to control the dimension and tolerance of the width of the reamer cylinder edge and to ensure its cutting inclination. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|