| 刘琼,陈昭平.监测切削功率变化的刀具破损控制报警系统研究[J].南华大学学报(自然科学版),2000,(2):.[.On the Tool Breaking Alarm and Control System through Monitoring the Differential Signal of Cutting Power[J].Journal of University of South China(Science and Technology),2000,(2):.] |
| 监测切削功率变化的刀具破损控制报警系统研究 |
| On the Tool Breaking Alarm and Control System through Monitoring the Differential Signal of Cutting Power |
| |
| DOI： |
| 中文关键词: 刀具,切削功率,微分信号,报警 |
| 英文关键词:cutting tool,cutting power,differential signal alarm |
| 基金项目: |
| 刘琼 陈昭平 |
常德师范学院计算机系!湖南常德415003(刘琼)
，长沙铁道学院计算中心!湖南长沙410001(陈昭平)
|
| 摘要点击次数: 942 |
| 全文下载次数: 4 |
| 中文摘要: |
| 刀具破损时其切削功率将瞬间降低或升高 ,因此其微分值将产生脉冲 ,利用此脉冲作为信号 ,可对刀具破损进行实时报警和控制 . |
| 英文摘要: |
| The cutting power will change suddenly when a cutting tool is broken.The differential value of the cutting power will result in a pulse which is used to give an alarm and to take a control action on real time when a tool is broken. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|